Carane Setup lan Gunakake CNC Router Machine lan CO2 Mesin Laser Combo? - Video

Indeks Video:

00:00:00,000 - 00:00:03,000

Hello everyone.

00:00:03,000 - 00:00:09,089

Ayo dadi nduduhake carane persiyapan lan nggunakake mesin CNC router lan CO2 mesin laser combo?

00:00:13,151 - 00:01:39,412

Priksa kabeh aksesoris karo mesin laser router CNC:

a. 2 pompa banyu kurang daya: Siji digunakake kanggo cooling spindle lan liyane kanggo cooling tabung laser.

b. Siji pompa banyu daya dhuwur digunakake kanggo cooling alat.

c. Siji pump online cilik digunakake kanggo jotosan muncung nalika laser engraving lan nglereni.

d. Siji tabung laser, mriksa paket, hubungi kita kanggo ijol-ijolan ing wektu nalika rusak.

e. Kothak alat kalebu pengontrol router CNC (DSP), sensor alat, manual pangguna, kunci allen, switch limit cadangan, macem-macem jinis wadhah alat, kunci spindle, lan piring tekanan material.

00:01:52,185 - 00:02:00,047

Klumpuk rantai seret ing sisih (dibuwang amarga syarat pangiriman).

00:02:22,457 - 00:02:25,378

Bracket kanggo mbenakake chain.

00:02:52,983 - 00:02:56,289

Sambungake rantai menyang ndhuwur.

00:03:18,043 - 00:03:22,766

Njupuk tabung laser lan ngumpulake ing krenjang.

00:03:45,987 - 00:03:50,609

Priksa manawa stopkontak tabung laser resik.

00:03:53,257 - 00:03:58,284

Titik metu cahya saka tabung laser menyang reflektor.

00:04:18,488 - 00:04:24,933

Jarak antarane tabung laser lan pangilon kira-kira 100-200mm.

00:04:40,054 - 00:04:48,422

Sambungake pipa banyu cooling.

Celupake selang nganggo pelumas utawa banyu lan sambungake selang menyang antarmuka.

00:04:52,204 - 00:04:58,516

Banjur nguripake tabung laser supaya inlet banyu mudhun lan stopkontak banyu munggah.

00:05:07,999 - 00:05:12,621

Sijine spons alus menyang krenjang lan ndandani tabung laser.

00:05:31,083 - 00:05:40,767

Sambungake baris voltase dhuwur saka sumber daya laser kanggo mburi dhuwur-voltase saka tabung laser. (Posisi inlet banyu)

00:05:54,319 - 00:05:58,536

Sawise tightening, ngumpulake tutup karet.

00:06:06,318 - 00:06:11,041

Pasang baris voltase kurang ing posisi metu laser.

00:06:31,529 - 00:06:38,784

Sawise laser nglumpuk lan tetep.

Pasang tutup protèktif sakabèhé.

00:08:24,624 - 00:08:28,639

Ngumpul DSP controller lan alat sensor.

00:08:49,531 - 00:08:53,951

Ketik kabel sinyal saka sisih tengen kothak kontrol.

00:09:01,174 - 00:09:04,075

Pasang port lan ndandani.

00:09:21,222 - 00:09:25,540

Nglumpukake controller lan ngencengi ngawut-awut mbenakake.

00:09:37,827 - 00:09:44,373

Pasang pompa banyu cooling saka kumparan lan pump banyu cooling saka tabung laser.

00:10:13,162 - 00:10:17,683

Konektor pipa banyu nyambungake stopkontak pompa banyu.

00:10:28,248 - 00:10:31,959

Lebokake ing wadhah banyu kanthi banyu resik.

00:10:39,993 - 00:10:47,263

Sekelompok pipa banyu abang. Iki nyambungake inlet banyu lan outlet saka poros utama.

00:10:47,263 - 00:10:55,834

Sambungake salah sawijining pipa banyu menyang pompa banyu.

Ora mbedakake antarane inlet lan outlet banyu.

00:10:56,395 - 00:11:01,625

Sijine liyane ing tank banyu.

00:11:02,572 - 00:11:07,802

Gunakake pompa banyu liyane kanggo nyambungake pipa banyu saka tabung laser.

00:11:10,469 - 00:11:16,813

Pipa banyu saka tabung laser mbedakake pipa inlet banyu lan pipa outlet banyu.

00:11:17,237 - 00:11:24,796

Yen pipa banyu dirakit mbalikke.

Tabung laser ora bisa digunakake.

00:11:35,478 - 00:11:40,202

Ana soket daya kanggo pompa banyu ing sisih kiwa mesin laser router CNC.

00:11:50,046 - 00:11:57,605

Pasang pompa banyu daya dhuwur.

Fungsine kanggo kelangan alat nalika nglereni utawa ngukir watu.

00:12:20,027 - 00:12:22,771

Sijine ing sink ing mburi mesin CNC.

00:12:31,221 - 00:12:37,475

Sambungake pipa banyu sing kandel menyang pompa banyu gedhe.

Mung siji pipa banyu sing kandel.

00:12:38,331 - 00:12:42,155

Nalika ngukir utawa nglereni watu, nguripake pompa iki.

00:12:57,512 - 00:13:01,201

Sambungake sumber daya sing cocog karo mesin.

00:13:10,955 - 00:13:19,325

Mesin dipérang dadi 380 volt. LLLN, 3 kabel panas lan kabel netral.

00:13:24,309 - 00:13:38,978

220 volt. LN, kabel panas lan kabel netral.

(Elinga yen ora 110V L N. Mesin iki ora ndhukung voltase 110V).

00:13:47,079 - 00:13:52,838

Lan 3 220 volt, LLL, 3 kabel panas.

00:14:07,300 - 00:14:10,584

Puter searah jarum jam kanggo ngeculake E-stop

00:14:15,619 - 00:14:18,215

Ing sisih kiwa ana saklar daya mesin.

00:14:19,444 - 00:14:24,387

Nalika ngalih kaping 2 nunjuk ing sisih kiwa, ana ing mode router CNC.

00:14:25,159 - 00:14:28,527

Nalika ngalih nunjuk ing sisih tengen, iku ing mode laser.

00:14:29,704 - 00:14:35,952

Kita 1st titik menyang mode router CNC. Banjur nguripake mesin.

00:14:39,945 - 00:14:45,119

Sawise controller diwiwiti. Pencet tombol "Batal" dhisik.

00:14:45,839 - 00:14:53,347

Ketik "Menu" "Setelan Mesin" "Pulse".

Priksa manawa pulsa sumbu XYZ bener.

00:14:53,811 - 00:14:56,684

Parameter pulsa ing kene bener.

00:14:57,449 - 00:15:05,511

Yen pulsa sumbu XYZ yaiku 400.

Hubungi insinyur kanggo ngowahi paramèter.

00:15:07,213 - 00:15:11,720

Saiki kita pencet tombol "Batal" kanggo bali menyang antarmuka utama.

00:15:12,658 - 00:15:17,165

Pencet tombol "HOME" kanggo bali mesin menyang asal mechanical.

00:15:21,208 - 00:15:25,715

Mesin bakal kanthi otomatis bali menyang pojok kiwa ngisor desktop.

00:15:36,665 - 00:15:41,172

Banjur sampeyan bisa mencet XYZ + - kanggo ngontrol arah obah saka mesin.

00:15:52,954 - 00:15:58,954

Sawise mesin bisa mindhah normal.

Pindhah sumbu X menyang sisih kiwa.

00:16:16,218 - 00:16:20,792

Arah saklar ing sisih tengen. Nguripake mode laser.

00:16:31,878 - 00:16:37,071

Mesin bakal kanthi otomatis pindhah menyang pojok tengen ndhuwur desktop.

00:17:00,159 - 00:17:04,461

Banjur bali menyang posisi wiwitan saka karya laser pungkasan.

00:17:23,345 - 00:17:27,558

Pindhah posisi sirah laser liwat controller laser.

00:17:48,848 - 00:17:53,738

Konfirmasi yen banyu adhem saka tabung laser sirkulasi normal.

00:18:14,373 - 00:18:16,776

Power ing pump online cilik.

00:18:29,874 - 00:18:33,582

Sambungake stopkontak udara menyang posisi sirah laser.

00:18:44,443 - 00:18:47,438

Gunakake akrilik kanggo imbuhan path cahya.

00:18:56,745 - 00:18:59,918

Ndandani akrilik ing reflektor 1st.

00:19:09,502 - 00:19:12,497

Pencet tombol "Pulse" ing pengontrol.

00:19:28,865 - 00:19:32,929

Priksa manawa laser mencorong ing tengah pangilon.

00:19:45,039 - 00:19:46,697

Tes pangilon kaping 2.

00:20:13,970 - 00:20:18,301

Konfirmasi yen laser madhangi tengah pangilon kaping 2.

00:20:29,233 - 00:20:39,891

Yen laser ora madhangi tengah pangilon 2nd.

Nyetel sekrup saka pangilon 1st supaya laser madhangi tengah pangilon 2nd.

00:20:47,002 - 00:20:51,206

Nyetel reflektor ndhuwur sirah laser.

00:21:05,454 - 00:21:10,974

1st banjur sirah laser ing sisih tengen mesin. (Cedhak pangilon 2)

00:21:20,034 - 00:21:23,692

Pencet "Pulse".

Ngobong titik.

00:21:32,335 - 00:21:37,746

Pindhah sirah laser menyang sisih kiwa.

Adoh saka pangilon 2nd.

00:21:42,825 - 00:21:46,660

Pencet "Pulse".

Ngobong papan liya.

00:21:50,581 - 00:21:53,894

Yen 2 dijupuk ora ing posisi padha.

00:22:04,943 - 00:22:07,989

Nyetel sekrup saka pangilon 2nd.

00:22:22,680 - 00:22:24,835

Test geni maneh.

00:22:39,993 - 00:22:47,027

Kajaba iku, 1 mindhah sirah laser menyang sisih tengen mesin.

Pencet "Pulse".

00:22:53,661 - 00:22:59,380

Banjur pindhah sirah laser menyang sisih kiwa mesin maneh.

Pencet "Pulse".

00:23:31,932 - 00:23:35,067

Mung sijine 2 nembak ing posisi sing padha.

00:23:48,334 - 00:23:55,657

Laser kudu disinari ing posisi sing padha kaping pindho.

Rampungake persiyapan laser ing kene.

00:24:32,073 - 00:24:34,315

Banjur nyetel laser ing nozzle.

00:24:44,385 - 00:24:48,100

Gunakake tape kanggo nempel ing nozzle.

Pencet "Pulse".

00:24:58,954 - 00:25:01,911

Priksa manawa bolongan kasebut ana ing tengah nozzle.

00:25:23,784 - 00:25:27,751

Nyetel sekrup saka pangilon kaping 3.

00:25:28,374 - 00:25:41,667

Tes maneh

00:26:25,064 - 00:26:31,673

Nganti dijupuk laser saka tengah nozzle.

Rampungake setelan jalur laser.

00:26:45,549 - 00:26:47,672

Test laser engraving.

00:27:02,196 - 00:27:06,209

Gunakake kabel USB kanggo nyambungake mesin menyang komputer.

00:28:09,854 - 00:28:15,038

Instal piranti lunak kontrol laser - RDWorks V8.

00:28:44,385 - 00:28:47,457

1st nginstal driver USB.

00:29:09,764 - 00:29:17,291

Banjur pilih posisi ing ngendi sirah laser bali menyang asal.

Mesin iki ana ing sisih tengen ndhuwur.

00:29:22,363 - 00:29:23,510

Klik "Instal".

00:29:25,648 - 00:29:26,427

Klik "Metu".

00:29:38,878 - 00:29:41,042

Bukak piranti lunak laser "RDworks V8"

00:29:49,812 - 00:29:54,115

Ing "USER". "Waca" paramèter ing mesin.

00:30:03,807 - 00:30:12,743

Yen ora bisa diwaca. Priksa manawa kabel USB disambungake kanthi bener utawa apa pengontrol laser diuripake.

00:30:19,556 - 00:30:25,284

Banjur ketik setelan vendor.

Tembung sandhi yaiku "rd8888".

00:30:27,071 - 00:30:29,324

Waca kabeh setelan ing mesin

00:30:47,995 - 00:30:56,575

Banjur ing setelan sistem. Setel lokasi omah lan posisi sirah laser. Ndhuwur tengen.

00:31:09,361 - 00:31:13,799

Ketik teks utawa grafis. Nyetel ukurane

00:31:35,910 - 00:31:41,562

Klik kaping pindho. Setel kacepetan, sapuan, daya, lan Interval.

00:31:59,353 - 00:32:04,190

klik kanggo ngundhuh". Transfer file menyang mesin.

00:32:09,295 - 00:32:12,350

Pindhah sirah laser menyang posisi sing bakal diukir.

00:32:21,948 - 00:32:29,013

Pencet tombol "Asal" ing kontrol.

Setel posisi saiki minangka posisi wiwitan karya.

00:32:31,325 - 00:32:34,380

Pencet "Frame" kanggo mriksa ukuran engraving.

00:32:44,995 - 00:32:52,388

Tansah nozzle babagan 10mm adoh saka materi.

Iki dawa fokus laser.

00:33:08,720 - 00:33:10,856

Pencet "Mulai" ing controller.

00:34:04,530 - 00:34:06,844

Ngalih mode router CNC.

00:34:19,895 - 00:34:22,209

Pindhah laser menyang sisih tengen.

00:34:30,967 - 00:34:33,014

Copot pompa udara.

00:34:42,716 - 00:34:44,941

Arah saklar ing sisih kiwa.

00:34:55,935 - 00:35:01,368

Kabeh sumbu bali menyang asal mechanical.

Kabeh sumbu ngarep.

00:35:30,618 - 00:35:34,625

Gunakake piring tekanan kanggo ndandani materi sing bakal diukir.

00:36:33,659 - 00:36:36,419

Ndandani alat menyang kumparan.

00:37:18,737 - 00:37:24,972

Pindhah alat menyang posisi ing ngendi sampeyan kudu miwiti engraving.

00:37:40,993 - 00:37:47,851

Pencet "XY-0" ing pengontrol. Setel asal kerja sumbu XY.

00:37:53,307 - 00:37:58,773

Alon-alon mindhah sumbu Z (alat) menyang permukaan materi.

00:38:01,668 - 00:38:05,396

Pencet "Z-0" kanggo nyetel asal kerja sumbu Z.

00:38:05,396 - 00:38:12,682

Posisi kerja sumbu Z uga bisa disetel kanthi otomatis nggunakake sensor alat.

00:38:14,999 - 00:38:24,602

Selehake sensor alat ing ndhuwur materi sing bakal diukir.

Pencet bebarengan "Menu lan ON / OFF" ing controller.

00:38:46,180 - 00:38:53,734

Nalika alat ndemek sensor alat, kanthi otomatis munggah. Pangukuran rampung

00:39:01,884 - 00:39:04,626

Banjur sampeyan bisa mbukak file engraving laser.

00:39:15,215 - 00:39:20,274

Nalika ngukir watu. Nguripake alat pump banyu cooling.

00:40:04,363 - 00:40:10,669

Sawise imbuhan laser rampung. Pasang tutup protèktif ing sisih tengen.

00:40:39,848 - 00:40:45,123

Majelis wis rampung.

Matur nuwun sampun mirsani.